This is a basic keyless entry system with low current lock and unlock outputs. It has a 15 amp parking light relay onboard and 2 auxillary outputs for a trunk release, remote starter or other options.

The controller also features a horn honk output. Included in the kit: Receiver Unit, 10-Pin Connector, 2 Remote Transmitters, 1 Valet Switch, 1 LED Light, 1 3-Pin Door Lock Plug.

This 7-Channel controller that comes standard with two - 4 button key fobs. This is a universally designed system that has 7 outputs and 2 inputs. It's original design was for multi channel function in medium duty work truck and automotive applications. This controller works great for door locking systems, DC motors such as linear actuators and power window systems.

This product has been in production for over 8 years with more than 50,000 units sold. It has 2-40amp relays on board, 4 outputs to drive relays and 2 inputs that can be configurred for positive or negative inputs. It also has one disable input for ignition or safety interlock. Standard software installed can operate door lock systems with dome light, shaved door applications for hot rod cars, motor controller outputs for running polarity reversing motors (linear actuators) and can be configured easily for almost any custom application. This controller includes everything pictured: the brain of the unit, wiring and 2 key fobs.

Similar to the Multi-B the RCU6 comes with (2) 6 button key fobs and has (6) 15 amp relays on board. It is designed to be a multi function motor controller. The outputs provide a +12 vdc constant output as long as you hold the button on the transmitter. It also has (1) disable input for ignition or safety interlock.

Same as our standard high current motor controller relay except we added RF control. Great for remote mounting locations, 100+ feet of range, multi channel remotes available to run up to 3 relays from one 6 button remote control. Features a IP65 waterproof rating. Available in 12 or 24 volt (100 amp) Patent pending.

Same as our standard high current motor controller relay except we added RF control. Great for remote mounting locations, 100+ feet of range, multi channel remotes available to run up to 3 relays from one 6 button remote control.

This relay also features limit switch inputs so it will automatically shut its self off when the motor reaches its target destination. Features a IP65 waterproof rating. Available in 12 or 24 volt (100 amp) Patent pending.

Designed to control two motors with current overload protection, this works great for linear actuator or other motor applications where there is the potential to destroy the motor due to over running. This controller measures the current and will stop it and prevent damage to the motor or gear train. We designed this controller for a application that needed to protect a gear motor and fragile valve system. We have modified it work in several applications. Please call us and see if it may work in your next project.

Building something custom and need a special control panel? We designed this to be a small high current panel that is customizable, easy to install, troubleshoot and service. With on board fuses, RF control and many inputs and outputs it is a advanced control system with an affordable price.

- (8) 40 amp relays on board RF remote control
- (2) 4 button fobs with customizable graphics
- Onboard fuse protection with LED blown fuse indication
- Deutsch connectors for easy servicing
- Rugged Aluminum housing
- Customizable engraving and branding